eScan Pro

Turn your laptop computer into a diagnostic powerhouse with the IPS (EScan Pro®) scan tool from ATS – The industry’s leading driveability analyzer.




IPS (EScan) Turn your laptop computer into a diagnostic powerhouse with the IPS (EScan Pro®) scan tool from ATS

The industry’s leading driveability analyzer. Many problems can be diagnosed on one simple test drive.  The Troubleshooter function runs data through algorithmic functions to quickly and reliably diagnose driveability problems, with or without trouble codes.

The volumetric efficiency test shows engine pumping (breathing) problems, such as restricted exhaust, intake leak or defective air mass meter. IPS uses calculations and known values to compare the test car to the proper specification.

Fuel Trim

Fuel trim test charts fuel trim in all rpm and load ranges to show clearly where fuel delivery deficiencies are located. Comparison of these charts can quickly determine problems such as low fuel pressure, restricted exhaust, bad fuel injector, etc.

When repairs are completed, a quick test drive will quickly verify if the car has been repaired properly.

The catalytic converter efficiency test shows the results in a percentage, easily showing an inefficient, failed or clogged catalytic convertor.

Power and fuel efficiency tests can test horsepower and fuel mileage if your customer is having issues.

Coolant warm up cycle graphing can reveal causes of overheating problems such as missing pump impeller, stuck thermostat, clogged radiator etc.

In addition to the Troubleshooter, IPS also contains a powerful OBD II scanner with the following features:

  • Very Fast Auto Connect
  • Easy PID Setup plus Calculated PIDs
  • Digital and Slide Bar Readouts
  • Powerful Graphing
  • Reading and Decoding Mode6 Data
  • Recording of Data and Screen Shots
  • Cursor Measurements of Charted or Recorded Data
  • Reading and Decoding DTCs and Pending Codes
  • Reading Freeze Frame Data
  • Reading and Plotting Monitors
  • Reading O2 Sensor Data
  • Resetting DTCs


Tech Recommendations

Designed from the ground up as part of a test solution package, you can expect it to work and play well with other ATS products as you build a diagnostic system unlike any other.

Interfaces to PC via USB Port or wireless Bluetooth

  • Large 1024×768 Pixel (XGA) Viewing Area with Large Colored Traces
  • Data Can be Saved to Text File for Future Retrieval. Unlimited record time!
  • Data Can be Saved to JPEG Image for E-mailing or Documentation
  • Web Enabled for Remote Monitoring on LAN or Internet
  • MultiTool Tab allows Simultaneous Viewing of EScan Data along with Data from other ATS Diagnostic Tools
  • Can be used with wireless Bluetooth adapter. Specify while ordering for Bluetooth!
  • USB Bluetooth adapter for computer side of wireless. Provides up to 100ft wireless connection to EScan.

For the EScan Pro® we recommend the following:

  • WXGA (1280×768 pixel resolution screen)
  • 1 GHz Processor Speed (faster is better)
  • Windows XP through Windows 10 operating systems including Windows 10 tablets.
  • (Windows RT tablets are not supported)
  • 256 MB RAM (more is better)
  • 500 MB Available Hard Disk Space
  • USB 2.0 port

EScan Pro, EScan Pro with Bluetooth

Software & Manuals

EScan – Rev 1.25 Released 03/18/2016

Download the EScan installation/update:

Learn How to Install the EScan Update

Additional Update information:

EScan Download and Installation of latest version – Rev 1.25:

Quick Start Instructions:

• Download (~64MB) and save it to your “My Documents” folder.

• Double-click on the downloaded file to install the EScan. If the installer asks you if it is OK to uninstall the existing version allow it to do so and then run the Setup a second time to install the new update.

• After the update is installed, you will need to reassign the port number.

• Note that the EScan program will only run if you have the ATS EScan interface hardware connected to an OBDII port with power (Key On) unless you run it in Demo Mode.

• If you are using a non-US version of Windows, you will need to set the Regional and Language Options (in Control Panel) to use North American style comma/decimal point conversion for calculated and other values to display correctly on EScan.

• See bottom of page for driver and Windows VISTA information.

For More detailed for instructions on installing the EScan update, click here.

Revision History (most recent version can be downloaded above):

03/18/2016: Rev 1.25:

• Enhancements to the WRAF Catalyst Efficiency test.

• Updated Mode 6 for GM, Ford, Chrysler, Hyundai and Kia.

• Replaced EScan manual with an entirely new PDF manual.

Note: on some computers the EScan Manual shortcut does not appear on the desktop.  Simply download the EScan Pro Manual from this link:

• Updated several of the ‘?’ help text sections within the EScan built-in help.

• Changed EScan icon and Logo.

• Enhancements to the Temperature Test.

• Added VIN to saved reports.

• Added VIN Decode Information to main screen.

• Updated VIN Database.


There are no reviews yet.

Be the first to review “eScan Pro”